Single Layer Sawdust Dryer YLHG 1.2×11.5


< Single Layer Sawdust Dryer Application >

    It's widely used after grinding process in biomass pellet production line.

    Available raw materials: Sawdust, fibrous,bulk or bulked powder biomass materials.

< Attractive Features >


   1. Support of roller ring and retainer wheel are integral cast steel structure, with high strength,stable operation, 

       anti-abrasion and long service time.

   2. Convenient feeding, feeding from middle of dryer by screw conveyor or from the top based on the different


   3. Sealed by flexible and anti-abrasion steel disc at the drum body and feeding &discharge end.It's of long service

       time and with easy installation.

   4. Lifting plates installed inside the drum makes the material fully mixed with the hot air,with low residue and

       high drying efficiency.

   5. Reasonable discharge structure that can separate hot air and material efficiently.

   6. Thermal insulation set at outer layer of drum can effectively prevent the heat from losing and improve the

       utilization efficiency.

   7. After drying moisture: about 10%-13%.

   8.  It can be adjusted the drying speed according to the moisture request.

   9. Siemens motor
   10. Capacity: 1t/h


< Technical Parameters >

Model YLHG1.2x11.5
Body Diameter(mm) 1200
Length(mm) 12000
Rotary speed(r/min) Can be adjusted by process
Capacity(t/h) 1
Inlet temperature(°C) <500
Raw material Sawdust,fibrous,bulk or bulked powder biomass materials
Moisture(%) 45
Outlet temperature(°C) 80
Power(kw) 3x2

< Single Layer Sawdust Dryer In Drying Process >

< Single Layer Sawdust Dryer In Biomass Pellet Line >


Why Choose Yongli?

Yongli clients have covered over 50 countries

Yongli Workshop

Yongli Factory