yonglilogo
Single Layer Drum Dryer YLHG 1*9



< Drum Dryer Machine Working Principle >
 

1. After the dehydrated wet materials enter the drum dryer, fliped by the shovelling plate device which are uniform

    distribution in the drum cylinder. The materials are evenly distributed in the drum cylinder,fully contact with the hot

    air, speed up the drying heat and mass transfer.


2. During the drying process, under the effect shovelling plate and hot treatment, the materials after drying are

    discharging from star type valve which in another section of the rotary dryer.


3. Drum dryer is suitable for drying various types of materials which the moisture content is less than 85%.


< Single Layer Drum Dryer Application >


    It's widely used after grinding process in biomass pellet production line.

    Available raw materials: fibrous,bulk or bulked powder biomass materials.


< Attractive Features >

 

   1. Support of roller ring and retainer wheel are integral cast steel structure, with high strength,stable operation, 

       anti-abrasion and long service time.

   2. Convenient feeding, feeding from middle of dryer by screw conveyor or from the upper part based on the 

       different materials.


   3. Sealed by flexible and anti-abrasion steel disc at the drum body and feeding &discharge end. It's of long service

       time and with easy installation.

   4. Lifting plates installed inside the drum makes the material fully mixed with the hot air,with low residue and high

      drying efficiency.


   5. Reasonable discharge structure that can separate hot air and material efficiently.

   6. Thermal insulation set at outer layer of drum can effectively prevent the heat from losing and improve the

       utilization efficiency.
 

   7. After drying moisture: about 10%-13%.

   8. It can be adjusted the drying speed according to the moisture request.

   9. Siemens motor

  10. Capacity:0.5t/h


< Technical Parameters >

Model Drum dimension (mm) Capacity
(t/h)
Motor power (KW) Dimension
(mm)
Weight
(T)
YLHG1*9 1000 0.5 3*2 (frequency) 10434*2380*1788 7.8

< Single Layer Drum Dryer Photos Show >