yonglilogo
Single Layer Sawdust Dryer YLHG 1.6×13


 

< Single Layer Sawdust Dryer Application >


    It's widely used after grinding process in biomass pellet production line.

    Available raw materials: fibrous,sawdust, bulk or bulked powder biomass materials.

    Model: YLHG1.6×13
  
    Capacity: 3t/h
 

< Attractive Features >

 

   1. Single Layers Sadust Dryer support of roller ring and retainer wheel are integral cast steel structure,with high

       strength,stable operation, anti-abrasion and long service time.

   2. Convenient feeding, feeding from middle of dryer by screw conveyor or from the upper part based on the 

      different materials.

   3. Sealed by flexible and anti-abrasion steel disc at the drum body and feeding &discharge end.It's of long service

       time and with easy installation.

   4. Lifting plates installed inside the drum makes the material fully mixed with the hot air,with low residue and high

      drying efficiency.

   5. Reasonable discharge structure that can separate hot air and material efficiently.

   6. Thermal insulation set at outer layer of drum can effectively prevent the heat from losing and improve the

       utilization efficiency.
 
   7. After drying moisture: about 10%-13%.

   8. It can be adjusted the drying speed according to the moisture request.

   9. Siemens motor

< Teachnical Parameters >
Model YLHG1.6x13
Body Diameter(mm) 1600
Length(mm) 15000
Rotory Speed(r/min) Can be adjusted by process
Capacity(t/h) 3
Inlet temperature(°C) <500
Raw material Sawdust,fibrous,bulk or bulked powder biomass materials
Moisture(%) 45
Outlet temperature(°C) 80
Power(kw) 4×2


Single Layer Sawdust Dryer YLHG1.6×13 Photo Show >




 

< Single Layer Sawdust Dryer In Pellet Production Line >


 

< Why Choose YongLi >
 


Yongli 22,000M2 Factory



Yongli Clients


If you are interested, welcome to inquiry  us!