yonglilogo
Three Layers Dryer YLHG 5



< Basic Features >
 

  1.Three-pass dryer, longer mixing duration of hot air and material. It is with high drying efficiency,heat utilization 

      ratio and less space needed. 


  2. Support of roller ring and retainer wheel are integral cast steel structure, with high strength,stable operation, 

      anti-abrasion and long service time.

  3. Feeding device is separately designed, which is convenient for installation and transportation.The drum of

      dryer can be designed to fit the transportation in the containers.


  4. Convenient feeding: feeding from middle of dryer by screw conveyor or from the upper part based on the

      different materials.

  5. Sealed by flexible and anti-abrasion steel disc at the drum body and feeding &discharge end.It's of long service

      time and with easy installation.


  6. Lifting plates installed inside the drum makes the material fully mixed with the hot air,with low residue and

      high drying efficiency.

  7. Reasonable discharge structure that can separate hot air and material efficiently.

  8. Thermal insulation set at outer layer of drum can effectively prevent the heat from losing and improve the

      utilization efficiency.


  9. Three layers drum dryer's floor space is 30% less than single drum dryer with same capacity. 

  10.Siemens motor


< Three Dryer Structure >

 




 

< Sawdust Drum Dryer Details >
 



 

Technical Parameters Of  Three Layers Dryer YLHG 5 >
 

Model YLHG5
Body Inside Diameter(mm) 3700
Length(mm) 10000
Rotary Speed(r/min) Can be adjusted by process
Capacity(t/h) 6-10
Inlet Temperature(℃) <500
Raw material Sawdust,wood power,other power biomass materials
Moisture(%) 45
Outlet Temperature(℃) 80
Power(kw) 11*4