yonglilogo
Home > News >
Pneumatic Device for wood pellet production line

 a.Check if there is any leakage of air compressor or the material keeping gate is in position.

b.Material flow regulator setting volume (0.4MPA in generally )

c.The sensor should be installed fixed and clean. Clip and collision phenomenon should be prevented.

d.Replace the cylinder each year, O ring and sealing element (oil seal, piston ring ).

e.Whether the bag structure is flexible, if the bag is installed fixed. Remember to replace the rubber belt and high-strength canvas strip.

f.Clean up the air pipe, keep the pipe be dust absorbed. With excellent surge efficiency.